How to Do Ozone Cupping

by | Last updated: Apr 28, 2021 | 9 comments

how to do ozone cupping featured o copy

On this page, you will find a step-by-step picture guide on how to do ozone cupping.

Ozone cupping, which is also called “ozone funneling”, is the process of concentrating the ozone stream onto one specific area of the skin with the help of a cup or funnel. The treated area needs to be moistened with warm water to open the pores. I recommend using a mask or a fan to protect yourself from breathing ozone during the treatment.  

Here, a complete list of the necessary equipment:

What equipment do you need to do ozone cupping?

Every ozone set-up consists of the following four parts:

What equipment you need for nasal insufflations

In this case, it translates to the following set-up:

how to do ozone cupping equipment overview

 

1. Oxygen source plus regulator, here it's a O2Ready oxygen tank and with a matching low flow regulator.

2. Ozone generator, here it's a Promolife Dual

3. Accessories: silicone tubing (around 2 x 3-4 ft. / 1 – 1.2 m), silicone cups, 3 male luer lock connectors, a spray bottle with warm water, a piece of cloth

4. Breathing protection: Mask, and a cup with the destructor attached

How to do ozone cupping step-by-step

Learn about how to protect yourself from breathing ozone

 

Suggested settings

Ozone concentration: 20 to 010 mcg/ml
Oxygen flow: 1/8 – 1/16 LPM
Duration: 2 to 10 min

 

Suggested settings

Ozone concentration:

20 to 100 mcg/ml

Oxygen flow:

1/8 – 1/16 LPM

Duration:

2 – 10 min

  1. Push a 3 or 4 feet (1 to 1.2 m) long silicone (or PVC) tubing onto the regulator. 
O2 ready regulator

2. Push a male luer lock onto the silicone tubing. 

Luer lock silicone O2ready regulator

3. Screw the regulator onto the O2Ready tank.

screw regulator onto O2ready tank

4. Screw the luer lock connector into the oxygen in port of the ozone generator.

oxygen in port dual

FIND

The Best Ozone Generator for Ozone Therapy at Home

5. Take another 3 to 4 feet (1 to 1.2 m) long silicone tubing and push a male luer lock into each end. 

silicone tubing two male luer locks

6. Screw one end of the silicone tubing into the “ozone out” port. 

ozone out port dual

7. Connect the other end with the inlet of the silicone cup.

cup silicone tubing

8. Plug the ozone generator into the power supply.

7 plug in generator copy

9. Spray some warm water on the cloth.

spray water on cloth

10. Wipe the area you want to cup with the wet and warm piece of cloth.

wipe area with cloth

11. Put the mask on. (If you prefer, use a fan instead.)

put mask on

12. Select the ozone concentration. Here, I pick 60 mcg/ml for an oxygen flow of 1/8 LPM.

select 60 ozone concentration M

13. Open the oxygen tank by turning the black dial to the right. You should see the gauge on the regulator jump up. 

O2ready tank open

14. Set the regulator to 1/8 LPM.

set O2ready tank to 1_8 LPM

15. Turn the ozone generator on. In this case, set the first dial to 5, the second to 2 to achieve 60 mcg/ml. 

turn ozone generator on to 5 2
Download the FREE

Ultimate Guide to Buying an Ozone Generator for Ozone Therapy at Home

16. Place the cup on the wetted area and press it down, so that no ozone can escape from underneath the cup. 

Press cup on leg

17. Keep the cup pressed on your skin for 2 to 10 minutes. 

keep pressing cup

18. Re-apply the wet cloth from time to time to keep the skin moist. 

reapply cloth

19. When you're done, turn off the ozone generator. 

18-turn-ozone-generator-off

20. Close the black dial on the O2Ready and release pressure from the regulator by setting it to the maximum flow (4 LPM) until the gauge goes down to 0.

release pressure O2ready tank

Download

FREE Ozone Resources

I show people

how to use

ozone therapy

in the most

effective way

 

Learn more

About the author:

PaolaI’m Paola the Crazy Old Ozone Lady behind The Power of Ozone. I’m a licensed naturopathic practitioner, natural health consultant, ozone therapy enthusiast, researcher, and ozone therapy analyst. I hold certificates in ozone therapy, hyperbaric ozone applications, Oxyvenierung, and the Andrew Cutler chelation. I own several ozone generators including a German hyperbaric 10 Pass machine. I have been using ozone for over 13 years, I’ve chelated with the ACC program for close to 5 years and I’ve been carnivore for nearly 1.5 years. This website serves as a resource for those who are interested in ozone therapy and other approaches to successfully manage chronic conditions.

Legal Disclaimer

Information provided is for informational purposes only and is not a substitute for professional medical advice. No health claims for these products or treatments have been evaluated by the United States Food and Drug Administration (FDA), nor has the FDA nor any other medical authority approved these treatments or products to diagnose, cure, or prevent disease. Neither The Power of Ozone nor the manufacturers of these items are responsible for the misuse of this equipment or the information on this page. It is highly advised to receive professional council from a licensed doctor before using ozone therapy or any of the mentioned products or tests on yourself.

Affiliate Disclosure

This website contains links to vendors of products I endorse, including amazon.com. If you decide to make a purchase through one of my links, they will pay me a commission. This does not influence my opinion about the products, as you can see from my reviews.

Subscribe

Buy the Ultimate Guide to Home Ozone Therapy

The Ultimate Guide to Home Ozone Therapy Image

Affiliate Disclosure

This website contains links to vendors of products I endorse, including amazon.com. If you decide to make a purchase through one of my links, they will pay me a commission. This does not influence my opinion about the products, as you can see from my reviews.

9 Comments

  1. Krisann Mayfield

    I have a benign tumor in my nipple that leaves a constant small open wound. I have been cupping it for the past few days with an air fed ozone machine with a tube inserted into a cup that I hold on my breast. In your opinion will this machine be effective at getting rid of this tumor even if it takes longer?

    Reply
  2. shantonu mallik

    excellent

    Reply
  3. Honey

    Have you heard of ozone cupping healing plantar warts? Lipoma? Is it good for muscle soreness??

    Reply
    • Paola Dziwetzki

      Hi Honey,

      I have heard about ozone injections helping with lipomas. As to plantar warts – can't recall anything right now, sorry. But may be worth a try …

      I successfully got rid of warts on my feet by drinking 2 to 3 cups of stinging nettle tea every day.
      Within a week the warts got soft.
      A week after that they turned red and blood shot.
      Another week or two after that they disappeared. Fell off or something, forgot exactly. But it worked quite well. This was years before I knew about ozone …

      Best,

  4. Graham Jessop

    Also forgot to add what is that above the cupping device? Is it a destructor? I've not seen one like that before, that's all.

    Reply
    • Paola Dziwetzki

      If you mean that black little pipe – yes, that's a destructor. It minimizes your ozone exposure during the procedure.

      Best,

  5. Graham Jessop

    Hi Paola, thanks for this description btw, what i wanted to ask was why do you always seem to use both channels of your promolife dual chamber ozone machine? I saw 59 in column 1 at the pic above which would have used less oxygen (1/16 instead of 1/8) and only be using half the machine, in effect saving the other half. What is the logic behind your thinking? Is it that you just like both channels working so the machine is also getting a bit of a workout? Just curious really.

    Reply
    • Paola Dziwetzki

      Hi Graham,

      the reason I use both cells in this case is because of the oxygen flow.
      I think using an oxygen flow of 1/16 LPM would take too much time to fill the cup and be effective, so I picked 1/8 LPM, in the hopes of speeding it up. This then requires me to use both cells on the generator to get the desired ozone concentration.

      But if you see good results with a flow of 1/16 LPM, then you can use that as well. It also depends on the size of the cup. Smaller cups may be OK with lower flows. Bigger cups would call for a higher flow.

      Best,

  6. Search4Truth

    Nice ahhh, cup.

    Thanks for the memories.

    Reply

Leave a Reply to shantonu mallik Cancel reply

Your email address will not be published. Required fields are marked *